Tel: +86 (0)21 34555005 34555008        Email: sales@suotopump.com 

PRODUCTS

Share to:

IHF Teflon Lined Chemical Pump

IHF fluorine plastic centrifugal pump is made according to the international standards and combining nonmetal pump design process. Pump body adopt metal casing lining FEP (F46), pump cover, impeller and bushings use metal embedded parts coating fluorine plastic sintering, shaft seals use out-fitted type advanced bellows mechanical seal, static ring choose 99.9% alumina ceramics (or si3n4), rotating ring adopt F4 filled material, its anti-corrosion and wear-resisting ability is extremely good.
Availability:
Quantity:

IHF fluorine plastic centrifugal pump is made according to the international standards and combining nonmetal pump design process. Pump body adopt metal casing lining FEP (F46), pump cover, impeller and bushings use metal embedded parts coating fluorine plastic sintering, shaft seals use out-fitted type advanced bellows mechanical seal, static ring choose 99.9% alumina ceramics (or si3n4), rotating ring adopt F4 filled material, its anti-corrosion and wear-resisting ability is extremely good. 
Actual use showed that the pump has the advantages of anti-corrosion and wear-resisting, high temperature resistant, not aging, high mechanical strength, stable operation, advanced structure, reliable sealed performance, simple disassemble and maintenance, long service life etc. 

Features

1. IHF corrosion resisting centrifugal pump fluorine plastic chemical pump is with disposable sintering.

2. Working for highly corrosive mediums between -85°C~120°C (-121°F~248°F), such as arbitrary concentration of vitriol, muriatic acid, hydrofluoric acid, nitric acid, aqua regia, strong base, strong oxidant, organic solvent, reducing agent, etc.

3. The casing is metal lined with F46/FEP, PFA, etc. Cover, impeller and shaft sleeve is metal insert with fluorine plastic jacket, inlet & outlet is strengthened with cast steel. All wet parts of pump are made of fluorine plastic.

4. Pump is widely used in chemistry, pharmacy, petroleum, metallurgy, smelting, electricity, electroplating, dye, farm chemical, papermaking, food, spinning or other industries.


Working Principle: Centrifugal
Main applications:   Chemical
Driver: Electric motor, diesel motor.
Power Specs: 220V/380/415V 3phase; 50hz/60hz
Max.permissible fluid temperature: 100°C(F46/FEP), 120°C(PFA)
Type of connection: Flange
Installation position: Horizontal
Casing parts material: Metal lined with F46/FEP, PFA, etc
Shaft seal type:   Mechanical seal
Maximum drive rating:  90KW(60HP)
Maximum caliber:   200mm(8inch)
Maximum discharge-side pressure: 1.25MPa(12.5bar)
Maximum head:  125m(410ft)
Flow rate range:   2.5-400m3/h(11-1760US.GPM)
 

 

IHF corrosion resisting centrifugal pump fluorine plastic chemical pump

Previous: 
Next: 
Technical Support
clean-21479_640.jpg
05 June 2020
Common failures of self-priming pumps

During the daily use of the self-priming pump, there will be some more common problems. For example, the self-priming pump's non-pumping problem will be caused by many different reasons, so how do we deal with these problems is the key. The reasons why the self-priming pump does not pump water include the following aspects.

pump-4784406_640.jpg
07 June 2020
Classification and difference of submersible pumps

The hot water submersible pump is used for hot spring bathing, and can also be used for extracting groundwater from deep wells, and can also be used for water lifting projects such as rivers, reservoirs, and canals. It is mainly used for farmland irrigation and human and animal water in high mountain areas. It can also be used for central air conditioning cooling, heat pump units, cold pump units, cities, factories, railways, mines, and construction site drainage. The general flow rate can reach 5~650m³/h, and the head can reach 10-550 meters.

irrigation-5296006_640 (1).jpg
10 July 2020
Diaphragm pump application advantages

Diaphragm pump is a new type of conveying machinery that can convey various corrosive liquids, liquids with particles, high viscosity, volatile, flammable, and highly toxic liquids. Diaphragm pump has four materials: plastic, aluminum alloy, cast iron, stainless steel.

CONTACT US

Tel: +86 (0)21 34555005 34555008
Fax: +86 (0)21 33250500

Add: No.7420, Caolang Road, Shanghai, 201516 P.R.China
Email: sales@suotopump.com
                                         COPYRIGHT  (C)  2015 SUOTO PUMP INDUSTRIAL ALL RIGHTS RESERVED. SITE MAP