Tel: +86 (0)21 34555005 34555008        Email: sales@suotopump.com 
|
|
|
|
|
|
|
|
|
|
|
|
Share to:

Top-flo Single Stage End Suction Booster Process Pump

EA series according to the European Standard BS EN733/ DIN24255 of performance.Pump shaft and motor shaft are close-coupled design. This way of coupling ensures the alignment of pump and motor. Pump impeller runs in good balance both dynamically and statically. Therefore pump would be kept very well in operation.

Quantity:

Top-flo Single Stage End Suction Booster Process Pump completed sets are designed with technical benefits to meet the needs of users in a variety of city water supply, fire fighting, irrigation, and cooling applications. 

Bare Shaft  • Direct Coupled with Electric Motor or Engine
DesignPerformance and dimensions referring to the European standard BS EN733/DIN24255
StructureHorizontal,Axial End-Suction,Single-Stage,Single-Suction,Volute Casing,Back pull-out
DN (mm)32 - 250
FlangeDIN2501 standard,ANSI B16.5 Class 150lb optional
CasingCast Iron standard,Ductile Iron,Stainless Steel optional
ImpellerBronze standard,Cast Iron,Stainless Steel optional
ShaftASTM420standard, ASTM304, ASTM316, ASTM1045 optional
Shaft SealMechanical Seal Standard, Gland Packing optional

● Applications     
1. Heating, ventilation and air-conditioning 
2. Fire Protection and Fire Fighting 
3. Water circulation 

4. Liquid transfer 
5. Irrigation   
6. Cooling   
7. Booster service 

Casing

 

Cast iron standard, Ductile Iron, Stainless Steel optional

 

Impeller

 

Bronze standard, Ductile Iron, Stainless Steel optional

 

Shaft

 

ASTM 420 standard, ASTM 304, ASTM 316, ASTM 1045 optional

 

Shaft seal

 

Mechanical seal (Carbon-Sic/Viton)

 

 

                 EAD            

 
50Hz Spectrum Diagram
60Hz Spectrum Diagram
Technical Support
clean-21479_640.jpg
05 June 2020
Common failures of self-priming pumps

During the daily use of the self-priming pump, there will be some more common problems. For example, the self-priming pump's non-pumping problem will be caused by many different reasons, so how do we deal with these problems is the key. The reasons why the self-priming pump does not pump water include the following aspects.

pump-4784406_640.jpg
07 June 2020
Classification and difference of submersible pumps

The hot water submersible pump is used for hot spring bathing, and can also be used for extracting groundwater from deep wells, and can also be used for water lifting projects such as rivers, reservoirs, and canals. It is mainly used for farmland irrigation and human and animal water in high mountain areas. It can also be used for central air conditioning cooling, heat pump units, cold pump units, cities, factories, railways, mines, and construction site drainage. The general flow rate can reach 5~650m³/h, and the head can reach 10-550 meters.

irrigation-5296006_640 (1).jpg
10 July 2020
Diaphragm pump application advantages

Diaphragm pump is a new type of conveying machinery that can convey various corrosive liquids, liquids with particles, high viscosity, volatile, flammable, and highly toxic liquids. Diaphragm pump has four materials: plastic, aluminum alloy, cast iron, stainless steel.

CONTACT US

Tel: +86 (0)21 34555005 34555008
Fax: +86 (0)21 33250500

Add: No.7420, Caolang Road, Shanghai, 201516 P.R.China
Email: sales@suotopump.com
                                         COPYRIGHT  (C)  2015 SUOTO PUMP INDUSTRIAL ALL RIGHTS RESERVED. SITE MAP