 |
| Quantity: | |
|---|---|
ISW series single stage single suction horizontal centrifugal pump is a high-efficient ,energy-saving product successfully designed by means of adopting the property data of IS model centrifugal pump and strictly in accordance with ISO2858 world standard and the latest national standard JB/T53058-93 and an ideal product to replace IS horizontal pump, DL model pump and other ordinary pumps.
Features
1. Impeller mounted directly on the long axis of the motor, pump and motor bearing arrangement is reasonable, pump operation can effectively balance the radial and axial loads, thus ensuring the smooth operation of the pump, small vibration and low noise.
2. Mechanical shaft seal, use of imported titanium alloy seal ring, medium and high temperature mechanical seal with carbide materials, anti-wearing no leakage.
3. Easy installation and maintenance, no need to open pipeline system, the rotation parts of the pump can be pulled out by removing the screws on the pump.
4. According to the needs of flow and head, the pump can be used in series or parallel operation mode.
Working Conditions
1. Suction pressure ≤1.0MPa, the maximum pump system working pressure≤1.6MPa, the pump hydrostatic test pressure ≤2.5MPa.
2. Ambient temperature <40 ℃, relative humidity≤40%.
3. Content of solid particles in the medium per unit volume does not exceed 0.1%, particle size <0.2mm.
ISW series single stage single suction horizontal centrifugal pump is a high-efficient ,energy-saving product successfully designed by means of adopting the property data of IS model centrifugal pump and strictly in accordance with ISO2858 world standard and the latest national standard JB/T53058-93 and an ideal product to replace IS horizontal pump, DL model pump and other ordinary pumps.
Features
1. Impeller mounted directly on the long axis of the motor, pump and motor bearing arrangement is reasonable, pump operation can effectively balance the radial and axial loads, thus ensuring the smooth operation of the pump, small vibration and low noise.
2. Mechanical shaft seal, use of imported titanium alloy seal ring, medium and high temperature mechanical seal with carbide materials, anti-wearing no leakage.
3. Easy installation and maintenance, no need to open pipeline system, the rotation parts of the pump can be pulled out by removing the screws on the pump.
4. According to the needs of flow and head, the pump can be used in series or parallel operation mode.
Working Conditions
1. Suction pressure ≤1.0MPa, the maximum pump system working pressure≤1.6MPa, the pump hydrostatic test pressure ≤2.5MPa.
2. Ambient temperature <40 ℃, relative humidity≤40%.
3. Content of solid particles in the medium per unit volume does not exceed 0.1%, particle size <0.2mm.
During the daily use of the self-priming pump, there will be some more common problems. For example, the self-priming pump's non-pumping problem will be caused by many different reasons, so how do we deal with these problems is the key. The reasons why the self-priming pump does not pump water include the following aspects.
The hot water submersible pump is used for hot spring bathing, and can also be used for extracting groundwater from deep wells, and can also be used for water lifting projects such as rivers, reservoirs, and canals. It is mainly used for farmland irrigation and human and animal water in high mountain areas. It can also be used for central air conditioning cooling, heat pump units, cold pump units, cities, factories, railways, mines, and construction site drainage. The general flow rate can reach 5~650m³/h, and the head can reach 10-550 meters.
Diaphragm pump is a new type of conveying machinery that can convey various corrosive liquids, liquids with particles, high viscosity, volatile, flammable, and highly toxic liquids. Diaphragm pump has four materials: plastic, aluminum alloy, cast iron, stainless steel.
